Can ship immediately
Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us: brenda@hongda-ic.com
1. Description
CD4066BCM is a four-way two-way switch for Transmission or multiplexing of analog or digital signals. it is Pin-to-pin compatible with CD4016BC, but there are many Lower "ON" resistance, "ON" resistance is relatively Keep constant within the input signal range.
2. Features
1. Wide supply voltage range 3V to 15V
2. High noise immunity 0.45 VDD (typ.)
3. Wide range of digital and ±7.5 VPEAK analog switching
4. “ON” resistance for 15V operation 80Ω
5. Matched “ON” resistance ∆RON = 5Ω (typ.) over 15V signal input
6. “ON” resistance flat over peak-to-peak signal range
7. High “ON”/“OFF” 65 dB (typ.) output voltage ratio @ fis = 10 kHz, RL = 10 kΩ
8. High degree linearity 0.1% distortion (typ.) High degree linearity @ fis = 1 kHz, Vis = 5Vp-p, High degree linearity VDD−VSS = 10V, RL = 10 kΩ
9. Extremely low “OFF” 0.1 nA (typ.) switch leakage: @ VDD−VSS = 10V, TA = 25°C
10. Extremely high control input impedance 1012Ω(typ.)
11. Low crosstalk −50 dB (typ.) between switches @ fis = 0.9 MHz, RL = 1 kΩ
12. Frequency response, switch “ON” 40 MHz (typ.)
3. Applications
1. Analog signal switching/multiplexing
- Signal gating
- Squelch control
- Chopper
- Modulator/Demodulator
- Commutating switch
2. Digital signal switching/multiplexing
3. CMOS logic implementation
4. Analog-to-digital/digital-to-analog conversion
5. Digital control of frequency, impedance, phase, and analog-signal-gain
4. Pin configuration
