Can ship immediately
Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us: brenda@hongda-ic.com
1. Describe
The i.MX 6ULL processor represents the latest from NXP Achievements in multimedia-centric integrated products Provides a high degree of high performance processing Function integration, aiming at the ever-growing Connect the device market. i.MX 6ULL is a high-performance, ultra-efficient Processor family with NXP advanced technology Implementation of a single Arm Cortex®-A7 core, It runs at speeds up to 900 MHz. i.MX 6ULL Includes integrated power management module Reduce the complexity and Simplified power sequencing. Each processor in this The series provides various memory interfaces, including LPDDR2, DDR3, DDR3L, raw and managed NAND Flash memory, NOR flash memory, eMMC, Quad SPI and various Other interfaces used to connect peripheral devices, such as WLAN, Bluetooth™, GPS, display and camera sensor.
2. Features
1. Supports a single Arm Cortex-A7 MPCore (with TrustZone), with:
— 32 KB L1 instruction cache
— 32 KB L1 data cache
— Private timer and watchdog
— Cortex-A7 NEON Media Processing Engine (MPE) coprocessor
2. Generic Interrupt Controller (GIC) with 128 interrupt support
3. Global timer
4. Snoop Control Unit (SCU)
5. 128 KB unified I/D L2 cache
6. L2 buffered single-master AXI bus interface output
8. Core frequency (including Neon and L1 cache)
9. NEON MPE coprocessor
— SIMD media processing architecture
— NEON register file with 32x64-bit general-purpose registers
— NEON integer execution pipeline (ALU, Shift, MAC)
— NEON double and single precision floating point execution pipeline (FADD, FMUL)
— NEON load/store and replacement pipeline
— 32 double-precision VFPv3 floating-point registers
3. Application
1. Telematics
2. music player
3. Connect the device
4. Internet of Things Gateway
5. Access the control panel
6. Human Machine Interface (HMI)
7. Portable healthcare
8. IP phone
9. Smart appliances
10. E-reader
4. External device interface
1. show:
- 1 parallel display port, supporting up to 85 MHz display clock and up to WXGA (1366 x 768) at 60 Hz
- Supports 24-bit, 18-bit, 16-bit and 8-bit parallel display
- The electrophoresis display controller supports E-Ink EPD panel direct drive, up to 2048x1536 resolution, 106 Hz
2. Camera sensor:
- One parallel camera port with up to 24-bit and 133.3 MHz pixel clock
- Supports 24-bit, 16-bit, 10-bit and 8-bit input
- Support BT.656 interface
3. Expansion Card:
- Both MMC/SD/SDIO card ports support:
- Up to UHS-I SDR-104 SD and SDIO card 1-bit or 4-bit transfer mode specification Mode (maximum 104 MB/sec)
- Specification of 1-bit, 4-bit or 8-bit transfer mode for MMC cards, up to 52 MHz in both SDRs And DDR mode (maximum 104 MB/s)
- Specification of 4-bit or 8-bit transmission mode for eMMC chips up to 200 MHz in HS200 mode (Maximum 200 MB/sec)
4. USB:
- Two high-speed (HS) USB 2.0 OTG (up to 480 Mbps), integrated HS USB PHY
5. Other IP and interface:
- Three I2S/SAI/AC97, each up to 1.4 Mbps
- ESAI
- Sony Philips Digital Interface Format (SPDIF), Rx and Tx
- 8 UARTs, each up to 5.0 Mbps:
- Provide RS232 interface
- Support 9-bit RS485 multi-point mode
- Support RTS/CTS for hardware flow control
- Four eCSPI (Enhanced CSPI), each up to 52 Mbps
- Four I2C, support 400kbps
- Two 10/100 Ethernet controllers (in accordance with IEEE1588)
- Eight pulse width modulators (PWM)
- System JTAG Controller (SJC)
- GPIO with interrupt function
- 8x8 keyboard port (KPP)
- A Quad SPI connected to the serial NOR flash
- Two flexible controller area networks (FlexCAN)
- Three watchdog timers (WDOG)
- 8-bit/10-bit/12-bit/16-bit camera interface
- Two 12-bit analog-to-digital converters (ADC) with a total of up to 10 input channels
