DSPIC33EP256MU806-E/PT

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   brenda@hongda-ic.com

1. Advanced Simulation Features

    1. Two independent ADC modules

        - One ADC configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H

        - One 10-bit ADC, 1.1 Msps with four S&H

        - Eight S&Hs using two ADC 10-bit modules

        - 24 analog channels (64-pin device), up to 32 analog channels Channels (100/121/144 pin devices)

    2. Flexible and independent ADC trigger source

    3. Comparators

        - Up to three analog comparator modules

        - Programmable reference with 32 voltage points

2. Timer/Output Compare/Input Capture

    1. 27 general purpose timers

        - Nine 16-bit and up to four 32-bit timers/counters

        - 16 OC modules configurable as timer/counter

        - Two 32-bit Quadrature Encoder Interfaces (QEI) Modules Configurable as Timer/Counter

    2. 16 IC modules

    3. Peripheral Pin Select (PPS) to allow function remapping

    4. Real Time Clock and Calendar (RTCC) module

3. High-speed PWM

    1. Up to seven PWM pairs with independent timing

    2. Dead time for rising and falling edges

    3. 8.32 ns PWM resolution

    4. PWM support

        - DC/DC, AC/DC, inverter, PFC, lighting

        - BLDC, PMSM, ACIM, SRM

    5. Programmable fault input

    6. Flexible trigger configuration for ADC conversions

4. Energy management

    1. Low power management modes (sleep, idle, doze)

    2. Integrated power-on reset and brown-out reset

    3. 1.0 mA/MHz dynamic current (typ.)

    4. 60 µA IPD current (typ)

5. Clock management

    1. 2% internal oscillator

    2. Programmable PLL and oscillator clock sources

    3. Fail-Safe Clock Monitor (FSCM)

    4. Independent watchdog timer

    5. Quick wake up and start up

6. Core: 16-bit dsPIC33E/PIC24E CPU

    1. Code efficient (C and assembly) architecture

    2. Two 40-bit wide accumulators

    3. Single cycle (MAC/MPY) with dual data acquisition

    4. Single-cycle mixed-symbol MUL Plus hardware partitioning

    5. 32-bit multiply support

7. Communication Interface

    1. Full-speed interface compliant with USB 2.0 OTG standard

    2. Four UART modules (15 Mbps)

        - Supports LIN/J2602 protocol and IrDA®

    3. Four 4-wire SPI modules (15 Mbps)

    4. Two ECAN™ modules (1 Mbaud) CAN 2.0B support

    5. Two SMBus capable I2C modules (up to 1 Mbaud)

    6. Data Converter Interface (DCI) module that supports I2S and audio codecs

    7. PPS allows function remapping

    8. Parallel Master Port (PMP)

    9. Programmable Cyclic Redundancy Check (CRC)

8. Input Output

    1. Sink/source 10 mA on all pins

    2. 5V tolerant pins

    3. Optional open-drain, pull-up and pull-down

    5. Overvoltage clamp current up to 5 mA

    6. External interrupts on all I/O pins

9. Debugger development support

    1. Online and in-app programming

    2. Five program and three complex data breakpoints

    3. IEEE 1149.2 Compliant (JTAG) Boundary Scan

    4. Tracing and runtime monitoring

10. Application

    1. Induction heating

    2. Uninterruptible Power Supply (UPS)

    3. DC/AC inverter

    4. Compressor motor control

    5. Washing machine three-phase motor control

    6. BLDC motor control

    7. Automotive HVAC, cooling fans, fuel pumps

    8. Stepper motor control

    9. Audio and fluid sensor monitoring

  10. Camera lens focus and stabilization controls

  11. Voice (playback, hands-free kit, answering machine, VoIP)

  12. Consumer Audio

  13. Industrial and building control (security systems and access control)

  14. Bar code reading

  15. Network: LAN switches, gateways

  16. Data storage device management

  17. Smart cards and smart card readers

11. Pin configuration