Can ship immediately
Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us: brenda@hongda-ic.com
1. Peripheral functions
1. Timer0: 8-bit timer/counter with 8-bit prescaler
2. Timer1: 16-bit timer/counter with prescaler, can be incremented by external crystal/clock during Sleep
3. Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
4. Two capture, compare, PWM modules
- Capture as 16 bits, max. 12.5 ns resolution
- Compare is 16 bits, max. 200 ns resolution
- PWM maximum value. 10-bit resolution
5. Synchronous Serial Port (SSP) with SPI (Master) and I2C™ (Master/Slave)
6. Universal Synchronous Asynchronous Receiver/Transmitter (USART/SCI) with 9-bit Address Detection
7. Parallel Slave Port (PSP) – 8-bit wide with external RD, WR and CS control (40/44 pins only)
8. Brown-out detection circuit for Brown-out Reset (BOR)
2. High-performance RISC CPU
1. Only 35 single-word instructions to learn
2. All single-cycle instructions except program branch, which is two cycles
3. Operating speed: DC – 20 MHz clock input DC – 200 ns instruction cycle
4. Up to 8K x 14 words of Flash program memory, Up to 368 x 8 bytes of data memory (RAM), Up to 256 x 8 bytes of EEPROM data memory
5. Compatible pinout with other 28-pin or 40/44-pin PIC16CXXX and PIC16FXXX Microcontrollers
3. Simulation Features
1. 10-bit, up to 8-channel analog-to-digital conversion Converter (A/D)
2. Brown-out Reset (BOR)
3. Analog Comparator module with:
- Two analog comparators
- Programmable on-chip voltage reference (VREF) module
- Programmable input multiplexing from device Input and Internal Reference Voltage
- Comparator output accessible externally
4. Special microcontroller features
1. 100,000 Erase/Write Cycle Enhanced Flash Program Memory Typical
2. 1,000,000 erase/write cycles data EEPROM typical memory
3. Data EEPROM retention > 40 years
4. Self-reprogramming under software control
5. In-Circuit Serial Programming™ (ICSP™) via two pins
6. Single-supply 5V in-circuit serial programming
7. Watchdog Timer (WDT) with its own on-chip RC Reliable Oscillator
8. Programmable code protection
9. Power saving sleep mode
10. Selectable oscillator options
11. In-Circuit Debug (ICD) via two pins
5. CMOS technology
1. Low power, high speed Flash/EEPROM Technology
2. Fully static design
3. Wide operating voltage range (2.0V to 5.5V)
4. Commercial and industrial temperature ranges
5. Low power consumption
6. Password configuration
