Can ship immediately
Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us: brenda@hongda-ic.com
1. Describe
The TLV9061 (single), TLV9062IDGKT (dual) and TLV9064 (quad) are single, dual and quad low voltage (1.8 V to 5.5 V) operational amplifiers with rail-to-rail input and output - swing capability. These devices are an extremely cost-effective solution for applications requiring low voltage operation, small size, and high capacitive load drive. Although the capacitive load drive of the TLV906x is 100 pF, the resistive open-loop output impedance makes stabilization easier at higher capacitive loads. These op amps are designed for low voltage operation (1.8 V to 5.5 V) and have performance specifications similar to the OPAx316 and TLVx316 devices. The TLV906xS devices include a shutdown mode that allows the amplifier to switch to standby mode with a typical current consumption of less than 1µA. The TLV906xS family helps simplify system design because it is unity-gain stable, integrates RFI and EMI suppression filters, and does not provide phase inversion under overdrive conditions. Tiny packages such as X2SON and X2QFN are available in all channel variants (single, dual and quad), as well as industry standard packages such as SOIC, MSOP, SOT-23 and TSSOP.
2. Feature
1. Rail-to-rail input and output
2. Low input offset voltage: ±0.3 mV
3. Unity Gain Bandwidth: 10 MHz
4. Low broadband noise: 10 nV/√Hz
5. Low input bias current: 0.5 pA
6. Low quiescent current: 538 µA
7. Unity gain stable
8. Internal RFI and EMI filters
9. Operates from supply voltages as low as 1.8 V
10. Easier to stabilize due to higher capacitive loads To Resistive Open Loop Output Impedance
11. Shutdown version: TLV906xS
12. Extended temperature range: –40°C to 125°C
3. Application
1. electric bicycle
2. Smoke Detectors
3. HVAC: heating, ventilation and air conditioning
4. Motor Control: AC Induction
5. refrigerator
6. Wearable device
7. laptop
8. washing machine
9. Sensor signal conditioning
10. Power module
11. Barcode scanner
12. Active filter
13. Low-Side Current Sensing
4. Pin configuration
5. Pin Description
6. Application Information
The TLV9062IDGKT family features 10MHz bandwidth and 6.5V/µs slew rate with only 538µA of current per supply channel, providing good AC performance with very low power consumption. DC applications are well served by Very Low Input Noise Voltage, Low Input Bias Current, and Typical Input Offset Voltage of 10 nV/√Hz at 10 kHz 0.3 mV.
