Can ship immediately
Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us: brenda@hongda-ic.com
1. Description
The STM8S001J3M3TR 8-bit microcontrollers offer 8 Kbytes of Flash program memory, plus integrated true data EEPROM. It is referred to as low-density device in the STM8S microcontroller family reference manual (RM0016). The STM8S001J3 device provides the following benefits: performance, robustness and reduced system cost. Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system. The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset. Full documentation is offered as well as a wide choice of development tools.
2. Core
1. 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline
2. Extended instruction set
3. Memories
1. Program memory: 8 Kbytes Flash memory; data retention 20 years at 55 °C after 100 cycles
2. RAM: 1 Kbyte
3. Data memory: 128-byte true data EEPROM; endurance up to 100 k write/erase cycles
4. Clock, reset and supply management
1. 2.95 V to 5.5 V operating voltage
2. Flexible clock control, 3 master clock sources
– External clock input
– Internal, user-trimmable 16 MHz RC
– Internal low-power 128 kHz RC
3. Clock security system with clock monitor
4. Power management
– Low-power modes (wait, active-halt, halt)
– Switch-off peripheral clocks individually
– Permanently active, low-consumption power-on and power-down reset
5. Interrupt management
1. Nested interrupt controller with 32 interrupts
2. Up to 5 external interrupts
6. Timers
1. Advanced control timer: 16-bit, 2 CAPCOM channels, 2 outputs, dead-time insertion and flexible synchronization
2. 16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)
3. 8-bit basic timer with 8-bit prescaler
4. Auto wakeup timer
5. Window and independent watchdog timers
7. Communications interfaces
1. UART, SmartCard, IrDA, LIN master mode
2. SPI unidirectional interface up to 8 Mbit/s
3. I2C interface up to 400 Kbit/s
8. Analog to digital converter (ADC)
1. 10-bit ADC, ± 1 LSB ADC with up to 3 multiplexed channels, scan mode and analog watchdog
2. Internal reference voltage measurement
9. I/Os
1. Up to 5 I/Os including 4 high-sink outputs
2. Highly robust I/O design, immune against current injection
10. Development support
1. Embedded single-wire interface module (SWIM) or fast on-chip programming and nonintrusive debugging
11. pin description
12. package information
